Peelable Radioactive Decontamination Film Aerosol Can
Contact Info
- Add:上海市金山区卫昌路293号2幢10379室, Zip: 201508
- Contact: 张小姐
- Tel:18916081601
- Email:1043645028@qq.com
Other Products
Peelable Radioactive Decontamination Film Spray Can, Peelable Film Elimination Can
Product Brand/Model: Yanquan/YQ
Product Introduction
The peelable radioactive decontamination film spray can is primarily used for radioactive contamination control and removal operations in confined spaces such as indoor environments. By spraying the peelable radioactive decontamination film material into the air and onto the surfaces of media in contaminated areas, it achieves rapid suppression and fixation of radioactive fallout and aerosols at nuclear accident sites, effectively controlling the spread of radioactive contamination.
Product Features
l The film has high strength and is not easily broken.
l Short film-forming time, high decontamination rate.
l High solid content, safe and environmentally friendly, non-corrosive.
Scope of Application
l Decontamination of operating equipment and workplaces in the nuclear industry and nuclear power industry.
l Decontamination and sealing of nuclear decommissioning equipment and sites to prevent secondary contamination.
l Various building substrate surfaces, such as concrete, asphalt, soil, tiles, etc.;
l Farmland, grassland, roads, docks, and building exteriors without standing water;
l Surfaces of instruments and equipment;
l Ground and walls of position engineering without standing water.
Physical and Chemical Indicators
Item | Indicator |
Spray Flow Rate | ≥2 L/min |
Working Pressure, MPa | 0.6-1 |
Spray Distance, m | ＞1 |
Film Tensile Strength: Tensile Strength, MPa | ＞10 MPa |
Elongation at Break, MPa | ＞500% |
Surface Drying Time | ≤1h (Ambient Temperature: 23±2°C, Relative Humidity: 50±5%) |
Film-Forming Time | ≤6 hours (Temperature: 25°C, Humidity: 50±5%) |
Decontamination Efficiency (Loose Contamination) | ≥95% |
Spray Consumption | 1 kg/m²～2.0 kg/m² |
Storage Performance | Recommended storage environment temperature: 5°C～35°C, shelf life: 12 months |
Remarks: 1) Main components: silicone rubber, curing agent, chelating agent; non-toxic and odorless. 2) Good fluidity, excellent self-adhesion, high self-healing capability, effectively adsorbs radioactive nuclides. 3) Coating thickness can be adjusted based on α/β radioactive nuclides. 4) Resistant to high and low temperatures, can be used long-term at -60°C to 250°C. 5) Sunlight, ventilation, temperature, and humidity affect surface drying time and peelable time. | |
Usage Method
Before using this product, ensure the pressure gauge indicates normal. If the pointer is in the green zone, pressure is normal; if in the yellow zone, it does not affect use; if in the red zone, pressure is low.
Please follow these steps to use the product:
(1) Carry the can to the decontamination site, approximately 1 meter from the surface to be decontaminated;
(2) Pick up the can and remove the safety pin;
(3) Hold the can with one hand and the activation handle with the other, pressing down. Once the can seal is opened, the decontamination film material will spray out;
(4) Spray consumption is 1 kg/m² to 2 kg/m²;
(5) After film formation, it can be recovered using recycling equipment or manually peeled off.
Copyright © Toocle.com. All Rights Reserved.
(浙)-经营性-2023-0192 |
